URL: https://petra3-extension.desy.de/e85199/e200896/@@siteview
Breadcrumb Navigation
May 2015 | PXN
No: 1 | Low [7KB, 250x165] | High [606KB, 1200x795]
The climatization units come through an opening in the roof.
No: 2 | Low [6KB, 165x250] | High [544KB, 795x1200]
The climatization units are moved into the building.
No: 3 | Low [9KB, 250x165] | High [651KB, 1200x795]
Many special lead-parts for the P65 experimental hutch.
No: 4 | Low [8KB, 250x166] | High [274KB, 1200x801]
The main climatization units are delivered.
No: 5 | Low [8KB, 250x165] | High [678KB, 1200x795]
Two walls for the P65 experimental hutch have been erected.
No: 6 | Low [9KB, 167x250] | High [246KB, 800x1198]
The first part for the P65 experimental hutch is being installed.
No: 7 | Low [9KB, 250x166] | High [268KB, 1200x801]
The facade is almost finished, but at least, cables for the DESY-Logo are installed.
No: 8 | Low [8KB, 250x166] | High [192KB, 1200x801]
Open tubes are still ending at the climatization room.
No: 9 | Low [10KB, 167x250] | High [271KB, 800x1198]
Some installations are already mounted in the bathrooms.
No: 10 | Low [7KB, 250x166] | High [214KB, 1200x801]
The offices have now windows, heating, wall ducts, and a nice view towards the Lise-Meitner Park.
No: 11 | Low [11KB, 250x166] | High [300KB, 1200x801]
Many cables are connected to the power switches.
No: 12 | Low [9KB, 250x172] | High [243KB, 1200x829]
A double bottom for the safety racks is mounted.
No: 13 | Low [12KB, 250x166] | High [256KB, 1200x801]
View from the other side: The short magnet structure is clearly visible and still covered with protective wood plates.
No: 14 | Low [13KB, 219x250] | High [200KB, 800x912]
Final inspection.
No: 15 | Low [11KB, 250x166] | High [253KB, 1200x801]
The undulator sits now on its mounting plate.
No: 16 | Low [12KB, 250x166] | High [289KB, 1200x801]
The wheels for transportation are removed.
No: 17 | Low [12KB, 250x166] | High [314KB, 1200x801]
The undulator for P65 is moved into its final destination.
No: 18 | Low [9KB, 250x165] | High [596KB, 1200x795]
Window frames and doors are installed at the foyer of the FLASH Seminar Room.
No: 19 | Low [7KB, 165x250] | High [602KB, 795x1200]
Stairs to the emergency exit are also installed inside the hall.
No: 20 | Low [12KB, 250x165] | High [826KB, 1200x795]
The main entrance on the north-west side of the hall.
No: 21 | Low [10KB, 250x165] | High [812KB, 1200x795]
The stairs to the emergency exit on the south side on top of the tunnel is mounted, and many roses are planted to hold the earth in place.
No: 22 | Low [8KB, 250x165] | High [659KB, 1200x795]
The facade on the northern side of the hall is almost finished.
No: 23 | Low [6KB, 165x250] | High [630KB, 795x1200]
The access points to the standpipes are connected to the water pipes.
No: 24 | Low [8KB, 250x165] | High [732KB, 1200x795]
First electronic racks for the control of the front-ends and for the vacuum systems of the beamlines are installed on top of the tunnel.
No: 25 | Low [9KB, 250x165] | High [720KB, 1200x795]
The installation of climatization tubes is still not finished.
No: 26 | Low [7KB, 165x250] | High [630KB, 795x1200]
The wooden railings are replaced by steel railings.
